WAVESHARE CAN FD Protocol Converter Compatible With CAN 2.0A/2.0B Protocols Spports DIN Rail Mounting(32599)

The CAN FD to RS232/RS485 converter is a DIN rail-mounted bidirectional CAN FD and RS232/RS485 conversion device

1. 0A/2.0B protocols. The product adopts an industrial-grade design, supporting a wide voltage range of 9V to 36V, with an arbitration domain baud rate of 5Kbps to 1Mbps and a data domain baud rate of 100Kbps to 5Mbps. The device supports PC software configuration, has a built-in 120-ohm bus resistor (quick access via DIP switch), supports DIN rail mounting, and offers convenient configuration and efficient installation. Working voltage: DC 9V ~ 36V. Dimensions: 110 x 27 x
2. 6 (mm). Mounting method: DIN rail mounting. Reload button: long press to restore factory settings. Indicator lights: POWER, WORK, COM, and CAN. CAN port specifications: 1 CAN port, supports CAN FD, compatible with CAN
3. 0A/2.0B. CAN port baud rate: arbitration domain baud rate: 5Kbps ~ 1Mbps. Data domain baud rate: 100Kbps ~ 5Mbps. Termination resistor: built-in two 120-ohm termination resistors. Setting any one DIP switch to ON connects one 120-ohm resistor in parallel; setting both to ON connects two 120-ohm resistors in parallel. Serial port specifications: supports one RS485 or RS232 connection. Modbus gateway: CAN FD to modbus RTU (Master/Slave). Transmit messages: supports 64 transmit messages. Receive messages: supports 64 receive messages. Conversion modes: transparent conversion, transparent with ID conversion, standard conversion, modbus conversion, and custom frame header/trailer conversion. CAN ID: supports standard frames and extended frames. Frame ID filtering: supports standard frames only, extended frames only, and custom input frame IDs (up to 32 groups). Conversion direction: supports bidirectional conversion, serial to CAN only, and CAN to serial only. Firmware upgrade: supports firmware upgrade via PC software. Parameter configuration: AT commands, PC software configuration. Electrostatic discharge protection: air discharge 8KV, contact discharge 6KV. Electrical fast transient/burst immunity: power supply circuit 2KV; RS485/RS232 circuit 1KV; CAN circuit 1KV. Surge immunity test: power supply circuit differential mode 1KV, common mode 2KV; CAN circuit common mode 2KV