220V Body Sensor Microwave Sensor Switch For Moving Objects

Overview & Features

. Operating voltage: 220V-240VAC. Power load: 1200W. Power frequency: 50/60HZ. Time delay: 10 seconds~30 minutes. Frequency system: 5.8Hz+/-75MHz CW radar. Transmission power: 0.2mW. Detection angle: 360 degrees. 8 Installation method: indoor, ceiling mounting. Light source control: 10-2000LUX. Detection distance: 2-10m. Size: 95x95x42mm. Is a motion detector with adjustable sensitivity and light detection time setting. Based on the Doppler principle and radar technology with antenna and high performance microchip. Can penetrate objects, so concealed installation is an option. Not affected by temperature, such as infrared induction will be at a temperature of about 37 degrees will be time-sensitive, such as summer, indoor, outdoor, or other operating environment may be higher than this temperature. Infrared induction, need to pass through the lens, induction range angle is small, the blind area is large, radar induction almost no blind area. Infrared induction will be affected by air dust, dust will affect the induction distance. Load power: 600W (resistive load, incandescent lamps and other resistive appliances) / 300W. Interface: 3 pole pluggable port (N, L, L), 1.5mm2 cable. Do not reverse the zero and fire wires, otherwise some equipment may not work..

Technical Specifications